A trench glaze is a raincoat that typically hangs downwardly to beneath the knees. In add-on to buttons, many trench coats take a sash that can exist tied to help go on the coat airtight against the wind. Many drawings that feature a trench coat often depict the trench coat slightly open up, revealing the body of the person wearing it. This isn't a difficult process and can be accomplished with a few simple alterations to the trench coat pattern.

  • A trench coat is a raincoat that typically hangs downwards to beneath the knees.
  • In addition to buttons, many trench coats have a sash that tin be tied to assistance proceed the coat closed against the wind.

Draw the coat on your subject field, following the lines of your subject'due south body to create the arms and trunk department of the trench coat. Draw all of the coat except for 1 side (the side of the coat you'll alter to create the open look).

Draw the sash tie of the glaze hanging limp on both sides of the coat. Create each sash past drawing two slightly wavy vertical lines running next. Connect the ii lines at the bottom to consummate each sash.

Draw the side of the trench glaze that will appear open by creating a vertical line extending abroad from the subject field wearing the coat. Draw information technology virtually the length of your subject's arm, then ring the line toward the bottom edge of your drawing surface at a 45-degree angle. This will be the open flap of the trench glaze, and the surface hither is the interior of the coat.

Curve the inner and bottom edges of the trench coat (the side that isn't drawn as a flap) slightly away from the subject of your drawing to create the consequence of the glaze falling open on this side as well.